User Instructions

The 120 Watt transformer has 120 watt circuits which will power up to 120

watts of light. To make sure the maximum number of fixtures can be safely

connected to this transformer, add up the individual wattage of all the

fixtures. The total wattage of your fixtures must not exceed output capacity

of the 120 Watt transformer.

CALCULATE LIGHTING CAPACITY

Be careful when splitting the

landscape cable. Do NOT

expose the copper cable.

Remove 1/2 inch of insulation

from both cables and twist the

ends.

INSTALLATION

1. Prepare the Cable

Lay the transformer on a flat, stable surface and use screwdriver to connect

the stripped ends of the cable under the terminal clamping plate.

2.Connect the cable to the Transformer

Note: Gently pull on the landscape

cable to verify if the connection is strong.

CAUTION: This landscape light system must be installed in accordance

with all local codes and ordinances. If you encounter problems, contact

a qualified electrician.