User Instructions

2) Add Manually Mode
• Click the "+" icon at the right corner and then choose the " Wi-Fi Low
Voltage transformer". (Figure 9)
Figure 9
Follow ①②③ on the app to confirm in turn (in step①),please check the mode
on the left side of at the top right corner, if it is not “EZ Mode”, please
switch to “EZ Mode”. In step ②, please press and hold the RESET button on
the transformer for more than 5 seconds, and release the button when the
indicator flashes. In step③, click "Confirm the indicator is blinking rapidly",
and click "Next"). As shown in Figure 10 to 12.
•
Note: Automatic connection time of devices varies depending on the strength
of WiFi signal, so please do not operate the phone. If the connection fails,
please reconnect, or switch to other stronger WiFi signal sources, or keep
your phone closer to the device, or connect it by following the Manually Mode
below.
Figure 10 Figure 11 Figure 12