User's Manual

ManualsBrands233621 ManualsAudio EquipmentTrue Wireless Earphones

PEARL II PRO

USER MANUAL

WHAT'S IN THE BOX

Type-C Cable

Ear Tips

Ear Buds

Charging Case

User Manual

PRODUCT ILLUSTRATION

Touch Pad Touch Pad

Ear buds

LED Indicato

Charging Case

LED Indicator

Function

Button

Type-C

Connector

CHOOSE YOUR EAR TIPS

Ear tips (XS/S/M/L X2) The size S ear tips are attached to the

ear buds in-box.

Note:

Do not plug the ear buds into your ears without installing ear tips,

as this may damage your ears.

WEAR DEMONSTRATION

After putting the ear buds into the ear, rotate and adjust the

ear bud to the right depth and angle to ﬁt the ear canal

(as shown below).

USE THE TOUCH PAD

Use touch pad to control Music volume / Play / Pause, Pick/

Hang up /Reject call, Noise Cancellation on / off, Ambient on /

off, and activate the Mobile phone's System voice assistant

for conversation.

① To avoid hurting your ears, please do not apply excessive

pressure on the touch pad with your ﬁngers (touch pad lightly);

② To avoid damaging the touch pad, please do not click on it

with any sharp objects.

TURN ON/TURN OFF

Bluetooth

233621 Pearl II Pro

Functions

Operations

Press twice/Put on

Press twice/Remove

Press twice

Press and hold 2s

Operations

Music

Play

Pause

Previous Song

Next Song

Pick/Hang Up

Call

Volume

Voice

Reject Call

Volume+

Volume-

Press once

Activate voice assistant

Press twice and the second

press hold for 2s

Left Ear Bud Left Ear Bud

Turn On：

1. When the ear buds is in the charging box,Open the cover of

the charging box

2. When the ear buds is not in the charging box，Press and

hold the ear buds touch pad for 5S

Turn Of：

1. When the ear buds is in the charging box,Close the cover of

the charging box

2. When the ear buds is not in the charging box，Press the ear

buds touch pad three times and the third press hold

PAIRING

1. Pair and connect for the ﬁrst time

① Take out the ear buds from the charging case;

② The LED on the ear buds flash red and blue alternately, and

the ear buds enter pairing mode.

Note:

a. For the ear buds that are not paired for the ﬁrst time, when connecting

a new mobile phone, you need to open the cover of the charging box,

Press and hold the function button for 2-8S, and the ear buds enter

pairing mode.

b. When the ear buds is turned on,press the touch pad 5 times to enter

pairing mode.

③ Find "233621

Pearl II Pro" on the Bluetooth list to pair the

ﬁrst ear bud;

NOISE CANCELLATION MODE AND AMBIENT MODES

Cycle through Noise

Cancellation Mode ON,

Ambient Mode ON and ALL

2. Bluetooth remote disconnection and reconnect

① If the ear buds are disconnected with the mobile phone and

return to the effective connection range within 10 minutes,

Bluetooth will automatically reconnect.

②If the ear buds are disconnected with the mobile phone and

return to the effective range after 10 minutes, Bluetooth

needs to be reconnected manually.

3. Turn on to reconnect

After putting the ear buds back into the charging case,Close

the cover of the charging box,and then open the changing

box, the ear buds will automatically connect to a recently

connected mobile phone.

4. To clear the pairing record of the ear buds

① Open the cover of the charging box.

② Press and hold the function button for more than 8S.

③ The LED on the ear buds flash red and blue alternately.

④ The pairing record is now cleared.

⑤ Open the charging box cover again and the ear buds will

enter pairing mode

Noise Cancellation Mode:

Our noise canceling technology and optimized passive isolation

can suppress wide-band ambient noise.

Ambient Mode:

Allows you to hear sounds around you even while wearing the

ear buds.

Note:

The ear buds are set to Noise Cancellation Mode when powered

Ear bud LED Behavior

① When the ear buds put the box, the blue light flashes once;

② When the ear buds enters pairing, red and blue flashes alternately;

③ When the ear buds is charging, the red light is always on;

④ When the ear buds is fully charged, the red and blue lights are off;

⑤ Clear the pairing record of the ear buds,red and blue flashes

alternately;

CHARGE YOUR EARBUDS

TOUCH FUNCTION

LED BEHAVIOR

① When the power of the ear buds is less than 10%, it will

prompt "Battery low ". Put the ear buds in the charging box,

the red light is always on, that is, charging.

② When the Type-C cable is inserted for charging, the red

indicator light of the charging box is always on.

③ When fully charged, the indicator light of the charging box

goes out.

Note:

a. please connect the computer or use the charger certiﬁed by the

regular manufacturer (output 5V / 1A or above)Charge and complete

the charging in about 2 hours.

b. If the headset is automatically turned off due to insufﬁcient power,

please charge the headset as soon as possible, such as for a long

time Failure to charge in time may result in failure to charge normally.

④ Enjoy your Pearl II Pro.

Press thrice

Summary of content (2 pages)

PAGE 1
CHOOSE YOUR EAR TIPS WHAT'S IN THE BOX Ear tips (XS/S/M/L X2) The size S ear tips are attached to the ear buds in-box. Note: Do not plug the ear buds into your ears without installing ear tips, Charging Case x1 Ear Buds x1 Ear Tips x3 as this may damage your ears. WEAR DEMONSTRATION PEARL II PRO USER MANUAL Type-C Cable x1 After putting the ear buds into the ear, rotate and adjust the ear bud to the right depth and angle to ﬁt the ear canal (as shown below).
PAGE 2
Charging Case LED Behavior THANK YOU Charging case: 3.7V,300mAh Being Charged Red light off:Battery power 100% Red light always on:Battery power 1-99% Play time: Not being charged Open / Close the top cover of the charging case/Press the function button 8 hours for ear buds,(ANC off) 16 hours of use for ear buds with the charging case. Water resistance rating: IPX4 (for ear buds only) Weight: 4.2g (single ear bud), 37.