Android TV User Manual
Android TV BOX User Manual Getting Started 1.1.1 Power On/ Off and Sleep 1. Connect the box to the TV with HDMI cable, connect box to the power adaptor, Connect mouse, air mouse or other input devices with USB port 2. After the device and cable connected ,power led turn to blue . 3. After the device and cable disconnected, Power LED turns off 4. Under power on mode, press remote control’s power button, device is entering into sleep mode. 5.
Android TV BOX User Manual 1.1.
Android TV BOX User Manual 1.1.8 Ethernet Function Home Screen SETTINGSNetwork Select “Ethernet” to open Ethernet function Insert network cable, network will be connected automatically 1.1.
Android TV BOX User Manual Select “Set up Wi-Fi hotspot” to set up “Network SSID”、 “Security”、 “Password” parameters * Ensure connected to the wired network, the box can be used as wireless AP to support more wireless devices access in the family 1.1.10 The Step that how to reflash the box 1) Uncompress the downloaded firmware (ROM) to the root of and SD card(format your SD card first). 2) Insert the SD Card into powered-off Box (power cable not plugged in) with no external USB storage attached.
Android TV BOX User Manual FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
