User's Manual

Saving Your Settings
35
8.6 KIT – VOL*
EQ This feature allows you to specify whether the signal of the selected drum channel is
sent through the EQ (see page 36) (EQ+) or not (EQ-). This feature is only available if
the value for BUS on the EQ-page is set to "drum".
The BUS signal itself is not affected by the EQ. Please check pages 54 and 63
for more
information about BUS settings.
BAL With BAL you determine where the sound is placed in the stereo sound image (left <>
right). Please note that the setting affects both the signal going to the internal mixer and
the signal on the BUS (individual outputs). If you have for instance a tom routed to BUS
3+4 and now turn BAL all the way to the right, the signal is only on BUS 4, but not on
BUS 3.
VOL With VOL you control the volume of the sound respectively of the drum channel. If you
change the value, this will automatically affect the VOL value on the KIT page DRUM,
which is identical with this VOL value here. See also page 29.
!