User's Manual

UNIT Mode
50
9.5 UNIT – HSET
HHPOS This parameter allows you to set the hi-hat’s aperture. This setting applies to all KITs
(presets). When this value is changed, the HH Controller loses its function—again
globally.
This function may come in handy if you don’t want to use a hi-hat controller and prefer a
fixed aperture setting instead.
The setting range is 1 (hi-hat completely open) through 31 (hi-hat completely closed).
“Off” means that the hi-hat controller can be used.
SENS Set the sensitivity of the hihat pedal (pedaled signal) here. You have a control range of -
6 to +6 dB.
CURVE There are nine different trigger curves. Select the value that supports your playing best
by rotating the DATA controller. Detailed information on the topic CURVE can be found
in the notes to page TRIG on page 46 ff.