User's Manual

UNIT Mode
60
If you have completed the process successfully, Done appears on the display. If NoChg
appears, the system has not made any changes.
Module Reset
To restore the factory default settings of your module, you can use the function INIT (see
above). You can also download a new DrumIt.dkit bank file from our website and overwrite the
existing file on your module with it. Please note that a complete init or loading a new DrumIt.dkt
files also corresponds to factory default sounds. If you have deleted sounds a “?” will appear
under FILE for that channel in the Kit.
Sounds can be downloaded for www.2box .se/downloads.
Personal Factory setting
The factory default settings are saved in the file „DrumItInit.dkit“ (see explanations on page
10). With a trick it is possible to create a personal init file, so you have access to your own
settings instead of the default settings in case of emergency. For this, back up the original
DrumItInit.dkit file on your computer (for the worst-case scenario) and copy your personal
"DrumIt.dkit" file to the module. Rename this copy to "DrumItInit.dkit".
This way you create an initialization file that contains your personal settings.