User's Manual

FAQs
75
Can I connect two pads to one plug and assign different sounds?
Absolutely. The drum channels TOM 1 to TOM 4 and SNARE have a parallel PERC channel, which can
be utilized separately using a Y-split cable. How this works is described in detail on page 13 and page 15.
Can I assign a separate MIDI channel to each drum channel?
Yes, in the mode UNIT on page INTF. How this exactly works is described on page 52.
I've lost a cable. Do I need to buy something special?
The 2BOX cables are standard stereo jack cables (6.3 mm).
Can I use the DrumIt Three with acoustic triggers?
Of course. The DrumIt Three works fine with the products of the major manufacturers, the most common
triggers have been tested successfully with the DrumIt Three. In the UNIT mode on page TRIG you will
find specific trigger TYPES (AcTr1, AcTr2 and AcTr3) and other parameters (GAIN, THRES), that allow
you to set the module so it is perfectly suited to the use with acoustic triggers. Please refer to the section
10.2 UNIT – TRIG* starting on page 43.