User's Manual

UNIT Mode
45
Type
Instrument
Kick
HH
Snare
Tom
Rim
Cymbal
Acoustic
various
1 Zone 2 Zones 3 Zones 1 Zone 2 Zones 1 Zone 2 Zones 3 Zones Trigger
PadP x x x x x
PaPSS x
PaPSY x
PadPS x x
Rim x
CyPSV x
CyPSB x
CyPS x x
CyPSS x
CyPSY x
HiHat x
AcTr1 x
AcTr2 x
AcTr3 x
RubH1 x
RubH2 x
RubH3 x
Kick1 x
Kick2 x
XTALK This feature can be used to prevent unwanted trigger impulses (cross talk) from other
pads. If, e.g. a hard cymbal stroke triggers a tom sound, you can suppress the latter.
Just select the channel of the unwanted sound (in our case: tom) and change the value
of XTALK. You have the following parameter values: Off (no suppression), Low (low
suppression), Med (medium suppression), High (maximum suppression).
LEVEL Here you can read the level of the trigger signal. There are three different views you can
select by pressing the DATA button to the right.
View 1 View 2 View 3
View 1 The number indicates which zone was triggered last. The graph displays
the signal level. While triggering, the dB value of the signal is shown in the
top row.
View 2 This view shows the last four strokes. You see the signal level in the first
row and the zone number in the second row.
View 3 This view gives you information about the triggered MIDI note number (N)
and the velocity value (L).