Install Instructions

2GIG
®
EDGE Security & Smart Home System
2GIG-EDG-RK | Edge Remote Keypad
10030219 Rev-X3 | Proprietary & Condential
Copyright © 2020 Nortek Security & Control LLC 10030219 Rev-X3
After power up, the Edge Remote
Keypad will display a message on the
screen. Press NEXT to continue.
If not connected already, connect your
EDGE Panel and EDGE Remote Keypad
to a Wireless Network.
After the Keypad has connected to
the chosen WiFi network, you’ll be
prompted to press PAIR on the Main
Panel.
One the primary panel, navigate to the
Installer Toolbox (See the 2GIG Edge
Security & Smart Home Installation &
Programming Guide).
1. Tap Panel Programming (
).
2. Tap Keypads (
).
3. Tap an available Keypad#, then
tap the adjacent Keypad Used
setting (or EDIT KEYPAD).
Tap Enabled.
1. Tap Device ID.
2. Tap PAIR KEYPAD.
Press the back button ( )
repeatedly to return to the Home
Screen.
The panels are now paired, both
displaying the Home Screen.
Pair the Edge Remote Keypad
After mounting and powering the Edge Remote Keypad, it will need to be setup and paired
with the EDGE Control Panel. The Edge Remote Keypad pairs through a network connection to
the Control Panel. The network connection can be through Access Point capability directly to
the EDGE Control Panel, or through a local wireless Wi-Fi network, or through a direct wired
connection to the local network router (if the Ethernet module is installed).
NOTE: Up to four SP1 Touch Screens can be paired with a EDGE Control Panel.
Follow these steps and refer to “Programming Sensors & Peripherals” in the 2GIG EDGE
Security & Automation System Installation & Programming Guide:
Limited Warranty
This Nortek Security & Control LLC product is warranted against defects in material and
workmanship for one (1) year. This warranty extends only to wholesale customers who buy
direct from Nortek or through Nortek’s normal distribution channels. Nortek Security & Control
LLC does not warrant this product to consumers. Consumers should inquire from their selling
dealer as to the nature of the dealer’s warranty, if any.
There are no obligations or liabilities on the part of Nortek Security & Control LLC for
consequential damages arising out of or in connection with use or performance of this
product or other indirect damages with respect to loss of property, revenue, or prot, or cost
of removal, installation, or re-installation. All implied warranties, including implied warranties
for merchantability and implied warranties for tness, are valid only until the warranty expires.
This Nortek Security & Control LLC Warranty is in lieu of all other warranties express or
implied.
All products returned for warranty service require a Return Authorization Number (RA#).
Contact Returns at 1-855-546-3351 for an RA# and other important details.
Support Services
Should you require support services for this system, contact 2GIG Technical Support at Nortek
Security & Control.
For support in the USA and Canada, contact 2GIG Technical Support at Nortek Security &
Control:
➣ Telephone: 855-2GIG-TECH
➣ Email: [e-mail]
➣ Dealer Site: dealer.2gig.com
➣ Websites: www.nortekcontrol.com and www.2gig.com
For support outside of the USA or Canada, contact your regional 2GIG distributor. For a list of
distributors in your region, visit the websites above.