Quick Start Guide

12
Copyright © 2020 Nortek Security & Control LLC
Bypass Sensors
When you open a protected door or window, the Not Ready to Arm message appears and reveals the zone in YELLOW on the Sensors Not Ready list. Before
you can arm the system, place the system into the Ready to Arm state by (1) walking to the sensor and closing it, or (2) bypassing the sensor(s).
Tap the Bypass All button. 1. Enable the Bypass option(s) to bypass
selected sensors.
2. Press the back button (
).
The system is now ready to arm with selected
sensors bypassed.
Number of bypassed
sensors. Tap to return
to the Bypass screen.

