Advanced Manual

Copyright © 2019 Nortek Security & Control LLC
17
System Powered ON
To replace the Cellular Radio Module into a system that is powered ON:
1. From the Home screen, tap System Settings.
2. From the System Settings menu, tap Cell Radio Swap.
3. Tap Begin.
4. If the Cellular Radio Module bay is locked, remove the faceplate and then move the door-lock screw to the
UNLOCK position. See “(Optional) Lock/Unlock the Cellular Radio Module Door.”
5. Remove the hinged door from the GC3 Control Panel.
Cellular Radio Module—Hinged Door
6. Pull the tab to remove the Cellular Radio Module.
7. Insert the GC3 Cellular Radio Module until it clicks into place.
8. (Optional) Install the lock on the Cellular Radio Module bay door.
9. Replace the hinged door.
10. Tap Done.