Advanced Manual

See the section “Setting up a Static IP address” to manually

conﬁ gure a static connection to the network.

3. Tap ▼.

NOTE: Hardwired connection must be active for

the Wired tile to be available. Once a hardwired

connection is active the Wireless (WiFi) tile will be

greyed out.

Access Point

Setup the GC3 Panel Access Point

1. Navigate to the Installer Toolbox menu and tap

Network Settings.

2. Tap Access Point

3. Enable Access Point

Optional: Press Edit icon next to default SSID,

enter new SSID name

Optional: Press Edit icon next to Password, enter

new password

Optional: Press Edit icon next to IP address, the

last two octets of the Access Point can be changed

to customize setup.

4. After any edits have been made, press Save

Access Point Settings to save any conﬁ guration

settings.

Note: Make a note of SSID and Password for use in

WiFi setup of SP1 and SP2 keypads.

5. Tap ▼.

Setting Up a Static IP Address

By default the the GC3 Panel will connect using DHCP to

get the IP Address assignment. If you want to set a Static

IP Address, follow these steps.

1. Tap Manual and select the Edit icon for IP Address.

Auto/Manual

2. Enter the desired IP Address.

IP Address

3. Select the edit icon for SubNet Mask and enter the

desired SubNet Mask Address.

Subnet Mask