Advanced Manual

2. Tap Edit Voice Descriptor to reveal the

touchscreen keypad.

Wired Zone <###>—Edit Voice Descriptor

3. At the touchscreen keypad, enter the ﬁ rst few letters

of the desired vocabulary word.

4. Tap the matching vocabulary word above the

touchscreen keypad to select it.

Voice Descriptor—Touchscreen Keypad Entry

Note: You can scroll through the list of vocabulary words by

swiping to the right or the left.

5. Repeat the steps above to enter the desired phrase.

Enter up to six words to create a voice descriptor.

6. Tap Done.

Voice Descriptor—Touchscreen Keypad Entry

7. Review the voice descriptor.

Review Voice Descriptor

8. Tap ▼.

Step 8: Enable or Disable Sensor Reports

Next, turn the sensor reports feature ON or OFF. When

enabled, the feature is ON and the system sends a report

to the Central Station when the sensor or peripheral is

triggered. When disabled, the feature is OFF and reports

are not sent to the Central Station.

1. At the Wired Zone <###> screen, highlight Sensor

Reports.

2. Under Sensor Reports, choose Enabled or

Disabled.

3. Tap ▼.

Step 9: Choose a Chime

Next, select the desired chime for the sensor or peripheral.

1. At the Wired Zone <##> screen, highlight Sensor

Chime.