Advanced Manual

Keyfob <###> Screen—Accept Serial Number

Tip: Instead of placing the GC3 Panel into Learning

Mode, you can manually enter the 7-digit TX ID on

the keyfob.

5. Tap ▼.

Step 5: Selecting the Smart Area Assignment

Select a Smart Area Assignment.

1. At the Wireless Zone<###> screen, highlight Smart

Areas Assignment.

2. Under Smart Areas Assignment, choose a Smart

Area (Partition) for the zone.

3. Tap ▼.

Keyfob <###> Screen—Choose Smart Area

NOTE: If Smart Areas option is enabled (Q69),

keyfob can be assigned to a single Smart Area and

will arm/disarm and initiate alarms (if programmed)

on the assigned Smart Area only.

Step 6: Choose the Equipment Age

Next, choose the equipment age.

1. At the Keyfob <###> screen, highlight Equipment

Age.

2. Under Equipment Age, choose New or Existing.

Keyfob <###> Screen—Equipment Age

3. Tap ▼.

Step 7: Enable the Emergency Key

Next, choose whether simultaneously pressing the Arm

Away and Disarm buttons on the keyfob triggers an

emergency alarm.

1. At the Keyfob <###> screen, highlight Emergency

Key.

2. Under Emergency Key, choose one of these

options:

Disabled: This turns the emergency key function

OFF on the keyfob.

Auxiliary: This setting triggers a 24-hour auxiliary

alarm on the system.

Audible: This setting triggers a 24-hour audible

alarm on the system.

Silent Panic: This setting triggers a 24-hour silent

alarm on the system.

Keyfob <###> Screen—Emergency Key

3. Tap ▼.

Step 8: Enable or Disable Fob Can Disarm

Next, choose whether the keyfob can be used to disarm the

system. When enabled, the keyfob has the ability to disarm

the system. When disabled, the keyfob does not have the

ability to disarm the system.