Advanced Manual

1. At the Keyfob <###> screen, highlight Fob Can

Disarm.

2. Under Fob Can Disarm, choose Enabled or

Disabled.

Keyfob <###> Screen—Fob Can Disarm

3. Tap ▼.

Step 9: Edit Voice Descriptor

Next, create a voice descriptor for the keyfob using the

words in the system’s vocabulary. See “Voice Descriptor.”

1. At the Keyfob <###> screen, highlight Voice

Descriptor.

2. Tap Edit Voice Descriptor to reveal the

touchscreen keypad.

Keyfob Programming—Edit Voice Descriptor

3. At the touchscreen keypad, enter the ﬁ rst few letters

of the desired vocabulary word.

4. Tap the matching vocabulary word above the

touchscreen keypad to select it.

Keyfob Programming—Word Entry Touchscreen

5. Repeat the steps above to enter the desired phrase

for the keyfob. Enter up to six words to make a voice

descriptor.

6. Tap Done.

7. Review the voice descriptor.

Keyfob Programming—New Voice Descriptor

8. Tap ▼.

Step 10: Enable or Disable Arm with No Entry

Delay

Next, enable or disable the Fob Arm with No Delay option.

When enabled, the option is turned ON, the system ignores

all Entry Delay timers (see “Q5: Entry delay 1, in seconds

(30-240)” and “Q6: Entry delay 2, in seconds (30-240)” )

when a keyfob is used to arm the system. When disabled,

the option is turned OFF and the system uses the Entry

Delay timers when a keyfob is used to arm the system.

1. At the Keyfob <###> screen, highlight Arm with No

Entry Delay.