Advanced Manual

3. Tap Edit Keypad.

For example, tap Keypad 1 to select it.

Keypads Screen—Edit Keypad

Step 2: Enable or Disable Keypad Used

Next, enable or disable the keypad. When enabled, the

keypad can be used with the system. When disabled, the

keypad cannot be used with the system.

1. At the Keypad <###> screen, highlight Keypad

Used.

2. Under Keypad Used, choose Enabled or Disabled.

Keypad <###> Screen—Keypad Used

3. Tap ▼.

Step 3: Select Equipment Code

For a complete list of the system’s four-digit equipment

codes, see “Equipment Code.”

1. At the Keypad <###> screen, highlight Equipment

Code.

2. Tap to expand the list.

3. Tap to select the desired equipment code from the

list.

Keypad <###> Screen—Equipment Code

Tip: You can alternatively use the touchscreen

keypad to enter the four-digit Equipment Code.

See “Equipment Codes.”

4. Tap ▼.

Step 4A: Pair SP1 or SP2

Pair the SP1 or SP2 keypad to the system. If SP1 or SP2

was selected in Equipment Code, this option will show as

Device ID.

NOTE: If programming a PAD1, the option will show

as Serial Number, follow Step 4B.

Before Pairing SP1 or SP2 the system and the

keypad must both be connected to the same

broadband network or keypad must be connect to

the systems internal Access Point via WiFi.

Before pairing a SP2, make note of the GC3s

broadband or Access Point IP address before

starting the process.

For more details, see the installation manual of the device.

1. Press Pair button.

2. Start pairing process on SP1 or SP2 (See SP1/2

installation manual for details).

3. System will show Device ID when paired.

4. Tap ▼.