Advanced Manual

7. Review the voice descriptor.

Keypad <###> Screen—Review Voice Descriptor

Next Steps

You have ﬁ nished programming a keypad. You can now

choose one of these options:

To program another keypad, tap Next Keypad

repeat the programming steps for another keypad.

The system keeps track of all your programming

changes and prompts you to permanently save all

your changes as a group when you exit the System

Conﬁ guration menu.

To program the next keypad, tap . This

button becomes visible and available only when

programming the last setting for a keypad.

To erase all of the settings you just programmed for

the keypad, tap Reset Keypad .

To permanently save the settings you just

programmed, tap Return to System Conﬁ guration.

Then tap . At the Conﬁ rm Changes screen,

tap Save.

The following illustration is an example of the Wireless

Zones screen.

Example—Wireless Zones Screen

2. At the Reset Zone message, verify that you are

deleting the desired item. Then tap Reset.

Reset Zone Message

This restores the factory default settings for the speciﬁ ed

zone, keyfob, or keypad.

Reset a Zone, Keyfob, or Keypad to the Factory

Default Settings

When you reset the GC3 Panel to its factory default

settings, the system erases all of the programmed settings

for any of the zones, keyfobs, or keypads controlled by the

system.

To reset zone, keyfob, or keypad to its factory default

setting:

1. At the Wireless Zones, Wired Zones, Keyfobs, or

Keypads screen, tap the trash can icon next to the

desired item.