Advanced Manual

When the system successfully removes the device, it

appears on the Listening for Devices to Remove screen.

Listening for Devices to Remove—Device Removed

Tip: The Control Panel issues a double-beep when

a device is successfully removed to the network.

4. Tap to return to the Smart Home Settings

menu.

Check the Network

Use the Check Network feature to scan the smart home

network for unresponsive nodes. This can take several

minutes and some of the smart home functions will be

unavailable until the check is complete.

To perform a network check:

1. Navigate to the Smart Home Settings menu. See

“Navigate to the Smart Home Settings Menu.”

2. At the Smart Home Settings menu, tap Check

Network.

Smart Home Settings—Check Network

3. At the Check Network screen, tap Start.

Check Network—Start

The system scans the network for unresponsive nodes and

indicates the status of each scanned node.

Check Network—Status

4. When the Check Network is complete you can see

the status of nodes in the network.

5. Tap to return to the Smart Home Settings

menu.

Rediscover the Network

After adding or removing devices from the network, the ﬁ nal

step is to rediscover the network. This updates the system’s

communication routes so it communicates with the newly

added and previously added Z-Wave devices.

To rediscover the network:

1. Navigate to the Smart Home Settings menu. See

“Navigate to the Smart Home Settings Menu.”