Tech Drawing

Disarm the System from Away Mode

To disarm the system from Away mode:

Enter the premises through a designated Entry Delay sensor-protected door.

Disarm the System

When the system is armed, it is actively protecting the premises. When you no longer want the system to protect the premises, you can disarm the

system.

Disarm the System from Stay Mode

To disarm the system from Stay mode:

At the Security or Menu screen, tap Disarm.

Enter your code to disarm the system.

TIP: If a false burglary alarm is activated while the system is armed (for example, someone inadvertently opens a protected door/

window) and you want to cancel or silence the alarm, see “If You Want to Cancel/Silence a False Burglary Alarm “ on page 11.

2 Enter your code to disarm the system.

NOTE: Consult your installer to determine the length of the Entry Delay feature. For compliance with

ANSI/SIA CP-01-2010, the default setting is 30 seconds. For more in-depth information, see the GC3

User Guide.