Tech Drawing

4
Copyright © 2019 Nortek Security & Control LLC
Welcome to the GC3 System
This Quick Reference guide shows system owners how to use the basic features of the 2GIG GC3 Security & Automation System. For more in-depth information,
download the GC3 User Guide from 2gig.com/dealers or visit http://www.2gig.com.
About this Guide
This guide is designed for use by home and business owners of the 2GIG GC3 Security & Automation System from Nortek Security & Control. It is recommended
that the GC3 Panel and all associated sensors and peripherals be professionally installed by an authorized 2GIG alarm dealer. For regulatory compliance,
professional installation is required. For a list of dealers in your area, visit
http://www.nortekcontrol.com.
Support Services
If you require technical assistance with the system, contact your 2GIG alarm dealer or visit your alarm dealer's website.
Home Screen
To wake the touchscreen, tap any area of the screen display or press the Home button on the right-side of the panel. The touchscreen goes into sleep mode after
one (1) minute of inactivity. To change this setting to between 30 seconds and 10 minutes, tap System Settings, enter the Master User Code, tap Screen, and
then change the Screen Timeout setting.
Home Screen Elements:
»
Arming Features: Tap Arm Stay or Arm Away to arm the system and use
the slide controls to turn the Silent Exit and Exit Delay features ON/OFF.
See “Burglary Protection” on page 7.
»
System Status: Reveals the system state. For example: System Ready to
Arm, System Not Ready to Arm, and so on.
»
System Icons: Indicate system information. See "System Icons" on page 6.
»
System Logo: Tap and enter the Duress Code to transmit a user duress
report to the Central Station. See "If You Need to Use the Duress Code" on
page 12.
»
Date/Time: Shows the system date/time.
»
Current Weather, Daily Forecast, and Hourly Forecast:
Requires an active account with a Remote Service Provider that supports
weather forecasts and weather service alerts.