Tech Drawing

ManualsBrands2GIG ManualsElectronicsGC3e Series Security & Home Automation Control Panel

Burglary Protection

To detect an intrusion, ensure the GC3 Panel is in the System Ready to Arm state (see "Bypass Sensors" on page 9). Then, arm the system.

Arm the System (Stay Mode)

Apply this mode when people and/or pets will be staying inside. Typically, this mode arms the premises' perimeter zones (for example, doors and windows) and

leaves the interior zones (for example, motion detectors) disarmed.

To arm the system:

1 2 3

IMPORTANT: Consult your installer to determine if the Quick Exit feature is enabled on your system. When Quick Exit is allowed and

the system is armed in Stay Mode, you have the option of tapping the Quick Exit button on the System Armed screen to start the Exit

Delay countdown. This gives you time to exit the premises without having to disarm the system. At the end of the countdown, the system

automatically re-arms itself in Stay Mode.

Tap Arm Stay. The system announces,

“Arming Stay.”

During the countdown, you have the option to

tap Silence which will extend the length of the

timer and silence the audible countdown.

After the countdown expires, the system is

armed. The system announces, “System

Armed Stay.”