Tech Drawing

9
Copyright © 2019 Nortek Security & Control LLC
Bypass Sensors
When you open a protected door or window, the System Not Ready to Arm message appears and reveals the zone in YELLOW on the Sensors Not Ready list.
Before you can arm the system, place the system into the Ready to Arm state by (1) walking to the sensor and closing it, or (2) bypassing the sensor.
To bypass the open sensors:
1
Review the Sensors Not Ready list
and close any desired sensors. If
you want to bypass the sensors in
the list, tap Bypass All.
2
Enter a valid user code. If the installer
enabled the Quick Bypass feature, you
are NOT prompted for your code and will
skip this step.
3
The system bypasses the sensor. You have
the option to tap yellow bubble ( ) to view
the sensor(s) in the Bypassed Sensors list.