User Manual

TIP: If you want to exit the premises through one

of the Exit/Entry doors while the system is armed in

Stay Mode, tap the Quick Exit button . See “Use

the Quick Exit Button” on the previous page.

2. At the Enter your code to disarm the system

screen, enter an active user code. You must enter a

code before the Entry Delay countdown expires.

Enter Your Code to Disarm the System

NOTE: Consult your installer to determine how the

Entry Delay feature is conﬁ gured on your system

(30-240 seconds).

The system is disarmed. If protected doors and windows

are closed, the system sounds the System Disarmed,

Ready to Arm announcement. If protected doors or

windows are open, the system sounds the System

Disarmed Not Ready to Arm announcement.

Disarm the System (Away Mode)

When the system is armed in Away Mode, any person with

an active user code can disarm the system. You must enter

the code before the Entry Delay countdown expires to

avoid setting off the alarm.

To disarm the system from Away Mode:

1. Enter the premises using one of the Exit/Entry

doors. The system’s Entry Delay beeps sound.

NOTE: Consult your installer to determine how the

Entry Delay feature is conﬁ gured on your system

(30-240 seconds).

2. At the Entry Delay screen, enter an active user

code. You must enter your code before the Entry

Delay countdown expires.

Enter Your Code to Disarm the System

The system is disarmed. If protected doors and windows

are closed, the system sounds the System Disarmed,

Ready to Arm announcement. If protected doors or

windows are open, the system sounds the System

Disarmed Not Ready to Arm announcement.

Transmit a User Duress Report

You can enter the Duress Code to transmit a user duress

report to the Central Station without alerting an intruder that

you are calling for help.

Transmitting a User Duress Report when the

System is Armed

To transmit a user duress report when the system is armed:

1. At the System Armed screen, tap Disarm.

System Armed—Disarm Button