User Manual

Copyright © 2019 Nortek Security & Control LLC.
29
2. Depending on how quickly you enter your code, one
of the following occurs:
a. If you enter your code before the Alarm Cancel
Time countdown expires, the following message
appears.
Alarm Report Already Transmitted … Cancel Being Sent Message
NOTE: Consult your installer to determine how the
Alarm Cancel Time setting is confi gured on your
system. For compliance with ANSI/SIA CP-01-2010,
the factory default setting is fi ve (5) minutes.
b. If you enter your code after the Alarm Cancel
Time countdown expires, the system reveals the
Alarm History.
Alarm History
The system clears the alarm. You can also clear the Alarm
History. See “Clear the Alarm History.”