User Manual

Smart Home Settings Menu

The Smart Home Settings menu provides installers

with access to a variety of Z-Wave settings for the GC3e

Security & Automation System.

Installers can conﬁ gure the system to give the Master User

permission to access the Smart Home Settings menu,

users who know the Master User code can access a variety

of Z-Wave settings for the GC3e Security & Automation

System.

NOTE: The GC3e Panel ignores any Command_

Class_Basic commands it receives from other

devices on the Z-Wave network.

Navigate to the Smart Home Settings Menu

To navigate to the Smart Home Settings menu:

1. At the Home screen, tap System Settings.

Smart Home Settings Button

2. At the Enter Your Code to Access the System

Settings screen, enter the system’s Master User

Code.

Enter Your Code to Access the System Settings

3. At the System Settings menu, tap Smart Home

Settings.

System Settings > Smart Home Settings

NOTE: Consult your installer to determine if the

Smart Home Settings menu has been enabled on

your system. Typically, this button is grayed out and

not available because the factory default setting for

this feature is Disabled but Visible.

This reveals the Smart Home Settings menu.

Smart Home Settings Menu

Add a New Device

TIP: Manufacturers may add Z-Wave devices to a

network in order to test them. To ensure successful

addition of a device to the GC3e Control Panel,

remove the new device before adding it to the

network. See “Remove a Device.”

To add a Z-Wave device to the network:

1. Navigate to the Smart Home Settings menu. See

“Navigate to the Smart Home Settings Menu” above.