User Manual

Copyright © 2019 Nortek Security & Control LLC.
57
6. At the Enter a name for this device screen, use
touchscreen keypad to enter a new device name.
For example, enter: Living Room Dimmer
Enter a name for this device
7. Tap Done.
The system reveals the new name on the Listening
for Devices to Add screen.
Listening for Devices to Add—New Device Name
From the Listening for Devices to Add screen, you can
continue by triggering the next desired device and then
renaming it as needed.
8. Tap to return to the Smart Home Settings
menu.
Remove a Device
To remove a device from the network:
1. Navigate to the Smart Home Settings menu. See
“Navigate to the Smart Home Settings Menu.”
2. At the Smart Home Settings menu, tap Remove
Devices.
Smart Home Settings—Remove Devices
The Listening for Devices to Remove screen appears.
Listening for Devices to Remove—Remove Devices Now
3. Walk to and trigger the device on the network. For
example, if you are removing a Z-Wave light bulb,
turn the light bulb ON.
TIP: Typically, you can trigger a device on the
network by either powering the device OFF/ON,
pressing a button once or twice, or fl ipping a switch
on the device. Every device is different. Consult the
device’s installation guide for instructions.