User Manual

4. At the Reset the Z-Wave Controller screen, tap

Reset Controller.

Reset the Z-Wave Controller—Reset Controller

NOTE: Resetting the controller will delete all node

information from the GC3e Control Panel. Any

devices that were part of the mesh network will need

to be manually removed from the network before

they can be added to a network.

While the controller resets, the Working message appears.

Reset the Z-Wave Controller—Working

5. When the controller is reset, the following message

appears. Tap OK or wait a few seconds for the

message to close automatically.

Z-Wave Controller Reset Message

View All Devices

The View All Devices function lists all Z-Wave devices

in the Control Panel network and provides the following

options, depending on the type and current status of a

device:

Conﬁ gure

Hide/Unhide

Identify

Remove

Rename

Replace

To view all network devices and access these options:

1. Navigate to the Smart Home Settings menu. See

“Navigate to the Smart Home Settings Menu.”

2. At the Smart Home Settings menu, tap View All

Devices.

Smart Home Settings—View All Devices

3. At the Smart Home Devices screen, review the list

of devices. If you have added several devices, you

can swipe up and down to move through the list.

Smart Home – View All Devices

4. To view the options available for a device, tap the

menu button ( ) .