User guide

Changes 1.2
10
1.2 Changes
Manual
Version
Amendments to Earlier Versions
1.00 The User Manual applies to EasyGate FW Version 1.00D.
1.01
New parameter for dial tone setting.
LED indications updated.
The User Manual applies to EasyGate FW Version 1.00E
1.02
Default setting for dial tone is continuous tone now.
The User Manual applies to EasyGate FW Version 1.00F
1.03
New function: tariff metering with 16 or 12 kHz pulses.
New function: call connect and disconnect signaling by 16 or 12 kHz
pulses.
The User Manual applies to EasyGate FW Version 1.00G
1.04
Continuous dial tone.
Chapter 0 modified.
SMS input parameters added.
1.05 GSM gateway name modification.
1.06 Analogue FAX support. (optionally)
1.07
Analogue Modem support, Network directing services support, Quadband
ver.
1.10 New design of manual
Cautions
 The manufacturer continuously meets customer requirements by
improving the firmware. For the latest EasyGate processor firmware,
programming tool and User Manual see www.2n.cz.
 For a detailed description of the EasyGate firmware upgrade refer to the
section devoted to the PC programming tool.