User guide

Description 2.1
14
2.1 Description
2N
®
EasyGate consites of GSM gateway in white plastic cover, removable antenna and
cables for connecting to phone set and PC
2N
®
EasyGate ’s status is indicated by LED diodes on its front side. All possible states
are described in the following figure.
Power supply
Light blue Power supply is connected and
2N
®
EasyGate UMTS is powered
Flashes 1× in 2 s HW error, contact the manufacturer
No light Power supply is not connected
GSM network
Light blue Registered to GSM
Flashes:
1× in 1 s = not registered, SIM card inserted
1× in 3 s = not registered, SIM card not inserted
4× quickly = enter your PIN
8× quickly = enter your PUK
quickly continuously = all functions are blocked.
Your SIM doesn’t correspond to the GSM operator lock.
Telephone line
No light Standby
Flashes quickly Seized line or ringing
Light Call
Flashes 1× in 3 s Data connection in progress
On FAX models
Flashes 2× then pause = fax connection in progress;
after power on signalize need of FW upgrade
Flashes 3× then pause = fax connection in progress
SMS connector
SMS sending input
Telephone line
(RJ 12, 6/2)
Power supply
connector
(DC Jack 2.1 mm)
RS-232C serial line
(D-Sub 9 pins)
Figure 2.2
2N
®
EasyGate
Connectors
Figure 2.1
2N
®
EasyGate
LED indicators