User guide

Table of Parameters 3.2

Dial tone - cadence Function No.: -

This tone is generated after Off-Hook in case EasyGate is ready to accept dialing.

Setting options: Continuous -EasyGate generate continuous dial

tone

Morse A -EasyGate generate dial tone with

320/320/640/640 ms cadence

Default setting: Continuous

Busy tone – Double frequency tone[Hz] Function No.: -

Set for double frequency tones

Setting options: YES/NO

Default setting: NO

Busy tone – frequency [Hz] Function No.: -

Setting of frequency/frequencies of busy tone.

Setting options: 5-1275 Hz

Setting step: 5 Hz

Default setting: 425 Hz

Busy tone - cadence Function No.: -

Busy tone cadence setting.

Setting options: 330/330 ms -cadence 330 ms tone, 330 ms pause

200/200 ms -cadence 200 ms tone, 200 ms pause

250/250 ms -cadence 250 ms tone, 250 ms pause

375/375 ms -cadence 375 ms tone, 375 ms pause

500/500 ms -cadence 500 ms tone, 500

ms pause

Default setting: 330/330 ms

Tone after disconnection Function No.: -

If the remote subscriber hangs up first, the EasyGate subscriber can hear the tone

selected here.

Setting options: Busy -EasyGate transmits the busy tone upon call

end.

Permanent -EasyGate transmits the permanent

tone upon call end.

Default setting: Busy tone