User guide

Table of Parameters 3.2

CLI transmitting Function No.: 19

Set this item to enable/disable identification of a telephone line calling from a GSM

network. The function can be enabled if you have a device on your telephone line

that is capable of receiving FSK according to ETSI standards.

Setting options: Disable -EasyGate does not transmit the CLI.

FSK during ringing -EasyGate transmits the FSK-

based CLI according to the ETSI EN 300 659 standard

(transmission during ringing).

Tbd. - prepared for future use

Default setting: Disable

Replace character + in CLI by Function No.: -

If this parameter is filled, the + character in the international prefix of CLI is

replaced by the defined string. The + character can neither be transmitted by the

FSK protocol nor dialed by the DTMF from a terminal.

Setting options: 0-15 characters (0-9,*,#)

Default setting: blank

Automatic call

BabyCall number Function No.: -

A number to be dialed for the automatic call function. If this item is blank, the

function is disabled.

Setting options: 0-15 characters (0-9,*,#,+)

Default setting: blank

BabyCall timeout [s] Function No.: -

Time between line Off-Hook and automatic call beginning (if enabled). During this

timeout EasyGate waits for dialing that cancels the automatic call. You can make

standard call if the BabyCall function is enabled.

Setting options: 0-15 s

Setting step: 1 s

Default setting: 0 s

FXS Routing Parameters

All parameters related to the number dialed for an outgoing call are arranged in this

table. According to the prefix you can:

 Bar the number to be dialed - the calling subscriber hears the busy tone;

 Accelerate connection establishing by knowing the number length for the

given prefix;

 Accelerate connection establishing by allowing to terminate dialing with a #;

 Modify the number to be dialed by removing and/or adding digits.

 Set tariff metering for the given prefix.