User guide

Table of Parameters 3.2
38
Roaming enable/disable Function No.: 42
You can make EasyGate work even if it is registered to a foreign GSM network.
Setting options: -Disable -The GSM module logs out of a foreign
network and attempts to register again in within 5
minutes.
-Enable -EasyGate works in any GSM network.
Default setting: Disable
Incoming calls enable Function No.: 43
With this parameter you can reject all incoming calls.
Setting options: Enable - Incoming calls ring on the telephone line.
Disable - Incoming calls are rejected.
Default setting: Enable
Call Handover workaround Function No.: -
This parameter offers a workaround to prevent problems during call handover into
the 1900 MHz (or 1800 MHz) band, caused by non-conforming configurations of
the 1900 MHz (or 1800 MHz) GSM network.
Setting options: -Disable -Disable workaround.
-Enable -Enable workaround.
-Select only when handover into a 1800/1900MHz band
fails.
Default setting: Disable
Low credit checking with prepaid SIM
Time period for low credit checking [h] Function No.: -
Set to change time interval between credit checks. If your credit drops under
defined value, EasyGate sends SMS "LOW CREDIT". The "0" setting means that
the function is disabled.
Setting options: 0-255 h
Step: 1 h
Default setting: 0
Code for credit checking Function No.: -
Credit in prepaid SIM cards is checked by network function, which displays text
message on mobile phone display. Code of network function must be terminated
with "#" symbol.
ATTENTION - find out if you have to pay for this function. Every check can lower
your credit.
Setting options: 0-8 characters (0-9,*,#,+)
Default setting: blank