User guide

Table of Parameters 3.2

Minimal credit Function No.: -

Set minimal credit value to send warning SMS "LOW CREDIT". If credit is lower

then given value, warning SMS is send after every credit check, until you recharge

your SIM card.

Setting options: 0-999

Step: 1

Default setting: 0

Credit value position in received SMS Function No.: -

If there are more numbers except credit value in text answer (e.g. date, time and

so on) EasyGate seeks the number corresponding with credit value from given

position in text. The seek algorithm skips every non-number character. If credit

value is the first number in text you can leave setting 0. If there are other

numbers before credit value, set parameter to text position, from which the

algorithm will seek.

Setting options: 0-180

Step: 1

Default setting: 0

Telephone number for service SMS Function No.: -

Telephone number for service SMS. The number is common for GGMC SMS and

"LOW CREDIT" SMS on prepaid SIM cards.

Setting options: 0-16 characters (0-9,*,#,+)

Default setting: blank

Service Parameters

Hardware version Function No.: -

EasyGate hardware version - for information only (cannot be modified). Must be

used for communication with the manufacturer.

Firmware version Function No.: -

EasyGate firmware version - EasyGate central processor program version. The

manufacturer can issue upgrades to extend functions. To load new firmware into

EasyGate use the Upgrade function. Keep communicating with the manufacturer.

Serial number Function No.: -

EasyGate serial number - for information only (cannot be changed). Must be used

for communication with the manufacturer.

GSM operator lock Function No.: -

Refer to GSM & SIM Parameters.