User guide

COM – Serial Interface 4.4

Outgoing and incoming calls can be made during GPRS connection. The GPRS

connection remains active during the whole call but no data can be transmitted

(EasyGate is a GPRS terminal of class B). Once the call is terminated, data

transmission is recovered immediately.

List of Supported AT Commands

There are original files related to SIEMENS GSM modules in the PDF format on the

EasyGate CD-ROM.

Caution

 Since the GSM module is primarily used by the EasyGate central processor

for voice calls, use AT commands carefully. You might misconfigure the

GSM module thus making EasyGate inoperative. To solve most of these

problems, switch EasyGate off and on again to make the central processor

execute full initialization of the GSM module.

Do not use particularly:

ATQ1 AT+CMUT= AT^SNFI=

ATS3= AT+CMUX= AT^SNFM=

ATS4= AT+CSCS= AT^SNFO=

ATS5= AT^SAIC= AT^SNFPT=

ATV0 AT^SM20= AT^SNFS=

AT&C0 AT^SMSO= AT^SNFV=

AT+IPR= AT^SNFA= AT^SNFW=

AT+CFUN= AT^SNFD=