User guide

Product Description 1.1
8
1.1 Product Description
Basic Features
 The primary purpose of EasyGate is to transmit voice between a GSM network
and an attached FXO-interface terminal (PBX, telephone, answering machine,
etc.).
 You can establish data connections (GPRS, CSD) and send/receive SMS using
EasyGate in combination with a PC and appropriate software.
 You can send an SMS to a pre-programmed number using the SMS sending
input.
 Analogue fax transmition on some models.
Advantages of 2N
®
EasyGate use
 Call cost cutting
by forwarding GSM calls to EasyGate you save a lot on PSTN – GSM calls.
 Easy installation
EasyGate is designed for immediate use without programming.
 You get all you need in the delivery
your EasyGate delivery contains all you need to operate the system (the power
supply adapter, telephone cable, PC serial cable, SMS input connector, CD-ROM
with software).
 Solution for sites without telephone lines
such as mountain chalets, exhibitions, conferences, etc.
 CLIP
EasyGate is equipped with the FSK-based CLIP feature, so if a terminal capable
of receiving the CLIP is used you know the caller‘s number.
 Quick data connection
EasyGate transmits data using the high-speed GPRS connection (GPRS class 10,
max. 85.6 kbps).
 SMS sending input
simply send an SMS to a pre-programmed number by closing the contact.
Recommended for easy supervision, simple securing, etc.
 Radiation hazard minimization
you are not exposed to a direct effect of the antenna RF electromagnetic field
while telephoning as opposed to mobile telephones.
 Full UMTS/GSM coverage
EasyGate is available in the following versions: dual-band (900 and
1800MHz), tri-band for European markets (900, 1800 and 1900MHz), tri-band
for the American market (850, 1800 and 1900MHz) and quadband (850, 900,
1800, 1900MHz).