Manual

Table of Parameters 3.2
32
Dial tone – frequency 1[Hz] Function No.: 120
Setting of frequency 1 of dial tone. This tone is generated after Off-Hook in case
2N® SmartGate UMTS is ready to accept dialing.
Setting options: 1-3400 Hz
Setting step: 1 HzD
efault setting: 425 Hz
Dial tone – frequency 2[Hz] Function No.: 121
Setting of frequency 2 of dial tone.
Setting options: 1-3400 Hz
Setting step: 1 Hz
Default setting: 425 Hz
Dial tone - cadence Function No.: 122
Dial tone cadence setting.
Setting options: Continuous ( 0) -2N® SmartGate UMTS generate
continuous dial tone
Morse A (1) -2N® SmartGate UMTS generate dial tone
with 330/330/660/660 ms timing
Default setting: Continuous
Busy tone – frequency 1[Hz] Function No.: 123
Setting of frequency 1 of busy tone.
Setting options: 1-3400 Hz
Setting step: 1 Hz
Default setting: 425 Hz
Busy tone – frequency 2[Hz] Function No.: 124
Setting of frequency 2 of busy tone.
Setting options: 1-3400 Hz
Setting step: 1 Hz
Default setting: 425 Hz
Busy tone - cadence Function No.: 125
Busy tone cadence setting.
Setting options: 330/330 ms (0) -cadence 330 ms tone, 330 ms pause
200/200 ms (1) -cadence 200 ms tone, 200 ms pause
250/250 ms (2) -cadence 250 ms tone, 250 ms pause
375/375 ms (3) -cadence 375 ms tone, 375 ms pause
500/500 ms (4) -cadence 500 ms tone, 500 ms pause
Default setting: 330/330 ms
Ring back tone – frequency 1 [Hz] Function No.: 126
Setting of frequency 1 of ringback tone. This tone is send after dialing end,
before UMTS/GSM network starts to generate its own Ringback tone.
Setting options: 1-3400 Hz
Setting step: 1 Hz