User guide

212N TELEKOMUNIKACE a.s., www.2n.cz

2.4 Configuration

Device Configuration

Configure using a PC equipped any web browser as follows:2N

Helios IP Audio Kit

Launch your web browser (Internet Explorer, Firefox, etc.).

Enter the IP address of your intercom (http://192.168.1.100/, e.g.).

You have to know the IP address of your device to log in to the integrated web server.

Upon purchase, is in the Dynamic IP address mode, i.e. it 2N

Helios IP Audio Kit

obtains the IP address automatically if there is an adequately set DHCP server in the

LAN. If no such server is available, set the Static IP address mode to your 2N

Helios

.IP Audio Kit

If the device remains inaccessible (you have forgotten the IP address or the LAN

configuration has changed, e.g.), change the network settings using the RESET button

on the device.

LAN Setting Change and Default Reset

Helios IP Audio Kit is equipped with a RESET button. Press the button shortly

(< 1 s) to restart the system without changing configuration.

Follow the instructions below to :identify the current IP address

Connect the loudspeaker to the SPEAKER terminals.

Press and hold the REST button.

Wait until the red and green LEDs on the device come on simultaneously (approx.

15 s).

Release the RESET button.

The device announces the current IP address via the loudspeaker connected

automatically.

Follow the instructions below to switch on the mode (DHCP OFF):Static IP address

Press and hold the REST button.

Wait until the red and green LEDs on the device come on simultaneously (approx.

15 s).

Wait until the red LED goes off (approx. 5 s).

Release the RESET button.