Configuration manual v2.6 Owner's manual

262N TELEKOMUNIKACE a.s., www.2n.cz
®
Each user can be assigned a private switch activation code. The user switch codes can
be arbitrarily combined with the universal switch codes defined in the Hardware |
menu. If the codes are identical with the codes already defined in theSwitches
intercom configuration, the mark will appear at the colliding codes.
Code – set a private user switch activation code: up to 16 characters including digits
0–9 only.
Time profile – assign a time profile to the switch code to define the code
validity. If the time profile is inactive, the switch will not be activated by the
code.
Each of the intercom users can be assigned one access RFID card. Refer to the Access
subsection for details.Cards
Card ID – set the user access card ID: 6–16 characters including 0–9, A–F. Each
user can be assigned just one access card.
Time profile – assign a time profile to the user access card to define the card
validity. If the time profile is inactive, the user access card will be detected as
invalid.