User manual, 1510 v1.13 Owner's manual

Configuration
3.3
103
RFID Card Reader
2N
®
Helios IP (Part Nos. 91371…U) can be equipped with an internal multifunction
module including an RFID card reader (Part No. 9137430E). This module enhances the
2N
®
Helios IP functions with an EM41XX RFID card reader, two relays for external load
switching, two logical inputs and RS-485 and Wiegand interfaces. The current
2N
®
Helios IP software version, however, supports the card reader and relays only.
RFID Card Reader Function
2N
®
Helios IP enables you to assign one RFID card to each user in the telephone
directory. Set the user card identification code in the ID card parameter in the
Telephone directory menu. Refer to the Telephone directory subs. for details. When
a valid card is applied, the lock assigned to the card reader gets activated. Assign the
lock in the card reader module setting menu (in RFID Card Reader - Module Settings).
We recommend you to use an external RFID card reader (Part No. 9137420E), which
can be connected to your PC (refer to the Configuration with External RFID Card
Reader subs.) and facilitate your setting of the user card identification codes.
Use of Plus and Minus Cards
The so-called plus and minus cards help you add and remove cards easily without
using the 2N
®
Helios IP configuration menu. The function works as follows:
Select two RFID cards marking them with + and -. Use the plus card to add items to
and the minus card to remove items from the 2N
®
Helios IP list of valid cards. Enter
the identification codes of these two cards into the Plus card ID and Minus card ID
fields respectively in the card reader module setting menu.
To add a card to the list of valid cards, apply the plus card to 2N
®
Helios and then, no
later than 3 seconds, the card to be added. The card will be added to the first free line
in the list of available valid cards. If there is no more free space in the list, the card
will not be installed. Installation or rejection will be signalled acoustically.
To remove a card from the list of valid cards, apply the minus card to 2N
®
Helios IP
and then, no later than 3 seconds, the card to be removed.
You can manage up to 10 cards in this way. Use the Installed cards menu (RFID Card
Reader - Installed Cards) to modify the list of available cards.
Keep the plus and minus cards on a safe place to avoid misuse.
RFID Card ID
An identification code is a unique RFID card number consisting of two asterisk-
separated sections. The first section specifies the ID type (format) and the other
provides the ID number itself. The current software version supports the following two
formats:
0*XXXXXXX ‘0’ is the internal 2N
®
Helios IP format.