User manual, 1510 v1.13 Owner's manual

2N® Helios IP Control as Viewed by External User
4.1
120
4.1 2N
®
Helios IP Control as Viewed by
External User
This section described the 2N
®
Helios IP control as viewed by an external user (guest).
Quick Dialling Buttons
By pushing a quick dialling button on the basic unit you can call to positions 1,2...6 of
the telephone directory (depending on the model type). With extending modules you
can use up to 54 quick dialling options.
By pushing a quick dialling button you call the telephone number assigned to the
selected telephone directory position. A call set-up is signalled by a long discontinuous
tone or any other tone as defined in the attached PBX configuration.
By re-pushing the same button during calling or setting up you can hang up, hang up
and call to another telephone number, or activate nothing as defined in the
Miscellaneous subsection.
You can also hang up the call any time by pushing # if the Hang-up by # button is
enabled; refer to Miscellaneous.
Calling to Telephone Directory Position
The 2N
®
Helios IP telephone directory may contain up to 999 pre-programmed
positions. You can use the quick dialling buttons for positions 1 to 54 only. To retrieve
the remaining positions, use the numeric keypad if Quick dialling using digits is
enabled; refer to the Miscellaneous subsection.
Procedure: Enter the position number using the numeric keypad (e.g. 05, 15, 200 –
two digits at least and three digits at most) and push * for confirmation.
You can also hang up the call any time by pushing # if the Hang-up by # button is
enabled; refer to Miscellaneous.
Calling to User-Defined Telephone Number
If the Telephone function enable (refer to Miscellaneous) is selected, you can call
the user-defined telephone number using the 2N
®
Helios IP numeric keypad.
Procedure: Push *. You can hear the continuous tone from the loudspeaker. Enter
the telephone number using the numeric keypad and push * again for confirmation.
You can also hang up the call any time by pushing # if the Hang-up by # button is
enabled; refer to Miscellaneous.