User manual, 1510 v1.13 Owner's manual

Display-Equipped 2N® Helios IP Control as Viewed by External User
4.2
122
4.2 Display-Equipped 2N
®
Helios IP Control
as Viewed by External User
Until the display program is uploaded to 2N
®
Helios IP, the display shows the following
text: 2N
®
Helios IP display is not configured; refer to the figure below. In this
state, 2N
®
Helios IP behaves and is controlled like no-display models, see Display-
Equipped 2N
®
Helios IP Control as Viewed by External User.
With the proper display configuration, the advertisement or electronic name tag mode
is displayed upon the 2N
®
Helios IP power on as pre-programmed.
The display-equipped 2N
®
Helios IP model is controlled using the numeric keypad and
quick dialling buttons. Buttons 2, 4, 6 and 8 are cursor keys in the telephone directory
mode. Buttons 3 and 6 are functional keys and initiate the action displayed in the
right-hand and left-hand screen corners.
Advertisement Mode
One or more images defined in the display program are displayed in the advertisement
mode. To quit the ad mode and move to the electronic name tag mode, push any
quick dialling button or numeric keypad key.
Electronic Name Tags
1, 2 or 4 name tags emulating the paper name tags can be displayed in the electronic
name tag mode. Push one of the 1, 2, 4 and 5 quick dialling buttons to call the user
assigned.
You can also enter the door lock opening codes and activate or deactivate a user or
profile in this mode. For steps refer to the no-display 2N
®
Helios IP subsection. Push
the quick dialling button 6 to move to the Telephone directory mode and the * button
to move to the Calling to number mode (only if the telephone function is enabled,
see E-Mail