User manual, 1510 v1.13 Owner's manual

Display-Equipped 2N® Helios IP Control as Viewed by External User
4.2
127
Subject
Specify the subject of the e-mail message to be sent.
Body
Enter the content of the e-mail message to be sent using any HTML formatting
tags. You can also insert special pre-defined symbols for certain data, such as
user name, date, time, identification and/or called number. These symbols are
replaced with real values before sending. Refer to the table below:
$User$ Called user name
$DateTime$ Current date and time
$DialNumber$ Called number
$HeliosId$ 2N
®
Helios IP identifier
Miscellaneous), 2N
®
Helios IP can be used for calling to selected telephone numbers in
a standard way. Push * in the Electronic name tag mode to move to this mode.
Push the quick dialling button 3 or the # button to return to the electronic name tag
mode. To dial and display the number to be called, use the numeric keypad and push
* for confirmation. Push the quick dialling button 6 to delete and re-enter the last-
dialled number if necessary.
Telephone Directory
A structured telephone directory as defined by the display program is displayed in the
telephone directory mode. To browse through the telephone directory use the numeric
keypad arrow keys (i.e. keys 2, 4, 6 and 8). Use the up and down arrows to move
between the items. Push the right arrow to establish a call or move to a subgroup. The
* key and quick dialling buttons 4 and 5 have the same function as the right arrow.
Use the left arrow to return to the superior group.
3-line telephone directory
4-line telephone directory
You can also use the telephone directory for retrieving contacts. Push the quick
dialling button 6 to switch on the phone directory searching mode.
To retrieve a text, use the numeric keypad. The text to be searched is displayed in the
centre of the status line. To delete the last character push the quick dialling button 3.