User manual, 1510 v1.13 Owner's manual

Mounting – Mechanical Installation

2.2

Figure 2.7 Cabling

Figure 2.8 Name Plate Removing

Figure 2.9 Insert Removing

Figure 2.10 Label Inserting

Outdoor installation rules

 Always connect button backlighting – it is used for heating.

 The joint between the roof module and the wall must be filled with a

waterproof cement to prevent water in-leak (see Figure 2.5).

 Water must not leak in along or around the cables.

Name tag material and printing

Each 2N

Helios IP package includes a sheet of transparent foil for laser printing. Cut

the printed foil into pieces and insert the labels in the name plates. Do not use paper

to avoid water in-leak and paper damage.

Red arrows are printed on the name plate. Make sure that the text and the arrow do

not overlap. We recommend you to use a template (MS Word) available at www.2n.cz

for printing.

Single button

(whole)

Double button

(horizontally divided)

Name 01

Name 04

Name 02

Name 05

Name 03