User manual, 1510 v1.13 Owner's manual

Acoustic Signalling and Keypad Configuration

3.1

Figure 3.3 Switching to Default Network Parameters – Static IP Address (Part Nos. 9137111E,

9137111CE, 9137111CKE)

For one-button 2N

Helios IP modules (Part Nos. 9137111E, 9137111CE,

9137111CKE), pushing key 1 fifteen times within 30 seconds after the internal

application launch results in turning on of the web server and switching the

network parameters from the DHCP to the default static IP address and vice versa.

Switching to Default Network Parameters – Dynamic

IP Address

Switching to the default network parameters with the dynamic IP address can be

performed in two ways. Either through a web interface as described in the Network

subsection or by pushing a combination of the quick dialling buttons as shown in

Figures 3.4–3.6. Upon resetting, the web server is automatically switched on if

switched-off before. The buttons have to be entered within 30 seconds after the

internal application launch as signalled by the tone sequence. The maximum delay

between the buttons is 2 s.