User manual, 1510 v1.13 Owner's manual

Acoustic Signalling and Keypad Configuration

3.1

Figure 3.6 Switching to Default Network Parameters – DHCP (Part Nos. 9137111E, 9137111CE,

9137111CKE)

For one-button 2N

Helios IP modules (Part Nos. 9137111E, 9137111CE,

9137111CKE), pushing key 1 fifteen times within 30 seconds after the internal

application launch as signalled by the tone sequence results in turning on of the

web server and switching the network parameters from the default static IP address to

the dynamic address and vice versa.

Web Server Switch On

If the web server is switched off, switch it on using the quick dialling buttons of the

Helios IP basic module as described in Figures 3.7–3.9. The buttons have to be

entered within 30 seconds after the internal application launch as signalled by the

tone sequence. The maximum delay between the buttons is 2 s.

Figure 3.7 Switching on Web Server Using Quick Dialling Buttons (Part Nos. 9137131E, 9137131CE,

9137131CKE)