User manual, 1510 v1.13 Owner's manual

Quick Configuration for Calling

3.2

3.2 Quick Configuration for Calling

This subsection describes the most common and convenient way of configuration. For

details on the configuration parameters refer to the subsections below.

Language Selection

Before you start configuring, select the administration web server language using the

folder menu in the right-hand upper corner of the screen.

Network Settings

If you have not set the IP address obtaining from the DHCP server, change the default

IP address of your 2N

Helios IP. To set the IP address, use the Other settings –>

Network menu as shown in the Network subsection.

Static Parameter Setting

For Windows OS users: to know your network parameters, enter in the command line:

ipconfig –all.

Static IP address

Set the IP address assigned by your LAN administrator.

Network mask

Set the network mask.

Default gateway

Set the default network gateway.

Primary DNS

Set the primary Domain Name Server IP address for your LAN.

Secondary DNS

Set the secondary Domain Name Server IP address for your LAN.