User manual, 1510 v1.13 Owner's manual

Configuration
3.3
66
General Settings
Position enabled
Here select whether the selected telephone directory position shall be enabled or
disabled. Remember to enable a position to call to its number.
Position name
Enter the name of the person to be assigned to a selected telephone directory
position. This parameter is optional and helps you search the telephone directory
more easily.
E-mail
Enter the e-mail address of the user to which information on missed calls should
be sent. Refer to the E-Mail subsection for details.
Telephone Numbers
Here define up to three telephone numbers to be called one after another when a
quick dialling button or keypad is used.
Numbers 1,2 and 3
Enter the telephone number to which the call is to be routed. If the call is not
answered by the station with the telephone number specified under Number 1, it
will be forwarded automatically to the telephone number specified under Number
2 and so on.
2N
®
Helios IP also allows for direct calling in the format sip:user_id@domain:port,
e.g.: sip:200@192.168.22.15:5062 or sip:name@yourcompany.
Time schedule
Assign a time schedule to a telephone number for validity management. Refer to
the Scheduler subsection for details on time schedule settings.
Station name
Enter the PC address to which information on the current call to the user telephone
number is to be sent. This information is used by the 2N
®
Helios Eye application for
displaying an additional video window for users that are not equipped with display
video telephones. Enter the address as follows: ip_address[:port]. The port
parameter is used optionally where address translation (NAT) is set between the
PC and 2N
®
Helios IP.
Substitute if inaccessible
Enter the person to whom the call will be routed if the original person is not
reached (for Part Nos. 9137131(CK)E, 9137161(CK)E, 9137111(CK)E with a
proper licence key only, Part No. 9137901).
User Activation and Deactivation
Here set the user activation and deactivation codes. The user may activate or
deactivate 2N
®
Helios IP using the user telephone or numeric keypad. If just one code
is set, or both the codes are the same, the current user status will be switched after