User manual, 1510 v1.13 Owner's manual

Configuration

3.3

code entering. You can verify the selected status by a sound signalling. Together with

the scheduler settings, the user activation and deactivation define whether a call will

be established for the given telephone number (for Part Nos. 9137131(CK)E,

9137161(CK)E and 9137111(CK)E with a licence key only, Part No. 9137901).

User Door Lock Codes

Write the user codes for 2N

Helios IP unlocking. Each user may be assigned two

unique codes for lock 1 and 2 opening. If the codes are identical with other codes

already entered in 2N

Helios IP, the following mark will appear with the respective

codes: (for Part Nos. 9137131(CK)E, 9137161(CK)E and 9137111(CK)E a licence

key is required, Part No. 9137901).

Card reader

User card ID

Identification of the RFID card assigned to the user.

Scheduler

The scheduler helps you set conditioned calling to user numbers. In case a user is not

present, 2N

Helios IP need not set up a call to his or her telephone number but can

automatically call other telephone numbers in the directory or the substitute number.

Each user number can be assigned a scheduler – profile. A total of 20 profiles can be

shared by the users (for Part Nos. 9137131(CK)E, 9137161(CK)E, 9137111(CK) this

number is 3, or 20 with a licence key only, Part No. 9137901). There are two possible

ways of profile validity condition setting: time setting in the Time schedule, or manual

setting of the profile activation and deactivation codes. For you to use both the

functions at the same time, the two conditions must be met at the same time.