User manual, 1510 v1.13 Owner's manual

Configuration

3.3

Network

This menu is used for setting the 2N

Helios IP network parameters. A change of any

of these parameters will not show until the next 2N

Helios IP restart.

By default, obtaining the IP address from the DHCP server is switched on in

Helios IP (DHCP client enabled). To find the IP address of your 2N

Helios IP, use

the 2N

Helios IP Network Scanner program included on the CD. If, in your LAN, the

DHCP server is not used or properly configured for your 2N

Helios IP, you can push

the appropriate quick dialling button sequence to switch 2N

Helios IP into the fixed IP

address mode (see the Switching to Default Network Parameters – Dynamic IP

Address subsection).

DHCP Settings

DHCP client enabled

Switch on the function of obtaining the IP address from the DHCP server.

Static Settings

For Windows OS users: find the network parameters by entering ipconfig –all in the

command line.

Static IP address

Set the static IP address assigned by your local network administrator.

Network mask

Set the network mask.

Default gateway

Set the default network gateway.

Primary DNS

Set the IP address of the primary Domain Name Server used in your LAN.

Secondary DNS

Set the IP address of the secondary Domain Name Server used in your LAN.

NAT Settings

These settings are applicable only if 2N

Helios IP is operated in a LAN and assigned

no public IP address.